Getting the correct equipment attachments for the job
First publishedin Aggregates Business Europe
Doosan Construction Equipment has launched a new family of high quality bucket attachments for the company's wheel loader range
Machine choice can be critical to a quarry’s productivity and matching a loader or excavator with a hauling solution to maximise efficiency has never been so important, writes Dan Gilkes
However, all of that good work can to some extent be undone if the loader is fitted with the wrong type or size of bucket.
In some respects buckets are like tyres. For some customers they are just a black hoop of rubber that keeps the machine off the ground, when in reality the modern earthmover tyre is a complex mix of compounds and reinforcing, with a grip pattern designed to maximise traction and minimise fuel consumption.
Likewise a bucket is not simply the big metal scoop that came with the machine when it was first purchased. Whether it has the right profile, the ideal cutting edge and teeth to penetrate the face, the correct size to allow the machine to easily lift and load, should not be a secondary consideration. Get it wrong and the machine can be unproductive, inefficient and costly to run.
This was reinforced at the recent Caterpillar Quarry Days held at its Malaga Demonstration and Learning Centre, where ground engaging tools (GETs) and their uses were discussed.
It was pointed out that selection of such attachments is usually based on three major performance characteristics, strength, penetration and wear life, and that selection is a balance of these characteristics.
For example, the choice of GET should be prioritised from the most to least important, and should also be influenced by operator technique and pit conditions.
Miller Mate is a simple solution to a potentially serious problem
The company offers a variety of attachments including a wide range of buckets that are manufactured to match with machines and offer the maximum productivity.
There is certainly no shortage of choice for buyers, with both original equipment machinery manufacturers (OEMs) and independent bucket makers competing for your business.
Doosan Construction Equipment, which owns the Geith brand of buckets and attachments, providing an in-house supply of buckets, launched a new family of buckets for its wheeled loader range earlier this year. These are typical of those offered by many manufacturers, offering robust construction and excellent penetration capabilities, covering the full range of applications from light duty to severe and arduous tasks.
Each bucket has been designed to fit specific models in the Doosan line-up, working within the kinematic parameters of the wheeled loader. The buckets are matched to the tipping loads of the machine for maximum stability and safe operation.
The range includes general purpose, heavy duty and dedicated rock buckets.
Quick hitch safety has also been high on the agenda for many over the last few years, with fully automated hitches now proving the most popular.
Miller International, one of the leading manufacturers of buckets and couplers, has launched the Miller Mate to combat incorrect use of quick hitches.
The in-cab device is said to simplify the safe and correct operation of a quick coupler during the attachment changeover process. It replaces the existing toggle-style switch with a simple and intuitive full-colour LED interface that can be mounted in the cab of any new or existing machine.
An increasing number of companies rely on quick hitch technology to allow rapid changes from bucket to breaker or ripper. (Pic: Hill Engineering)
“We realised that coupler safety has always focused on the design of the coupler itself, but if there is ever an incident with a quick coupler it is those working nearby who are affected,” says Keith Miller, chairman of Miller International.
“The new product helps to minimise the potential risks to those working in the vicinity of the machine.”
The in-cab display shows graphic illustrations of the correct operating procedure as per the manufacturer’s recommendations. It encourages the operator to place the quick coupler in the correct positions throughout attach and release processes.
Miller Mate operates the hydraulic cylinder within the coupler only when the operator has confirmed it is at the correct stage of the process, and it includes dynamic safety checks too and these are carried out every time the unit is switched on, with potential problems displayed on the screen to alert the operator. The system also logs every changeover to monitor the operator’s performance and flag up any potentially dangerous errors.
It is not just wheeled loader buckets that have seen activity, as Volvo has unveiled a revised range of excavator buckets which are designed to match the technical and performance characteristics of Volvo machines. They include general purpose and heavy duty buckets for large excavators.
The buckets for the larger excavators are optimised for ground penetration and have been built from high-tensile steel with wear plates for durability.
The general purpose range is said to be ideal for digging and rehandling soft-to-medium materials, and is available in several direct-fit or quick-coupler designs, while the heavy duty buckets suit mining or quarrying applications.
Caterpillar offers a variety of attachments including a wide range of buckets
Returning to quick hitches, an increasing number of companies rely on the technology to allow rapid changes from bucket to breaker or ripper, increasing productivity and reducing downtime.
However, operators should remember that installing a quick hitch can radically alter the kinematic design and performance of a machine, as it in effect increases the length of the dipper arm.
This may lead to a requirement for a slightly smaller bucket, or one with a different design to cope with the additional stick length and pin position.
JCB has also taken steps to improve quick hitch safety, equipping its excavators with sensors on the boom and dipper. These work with the excavator’s electronic control system to ensure that the bucket or attachment is in a safe location before the quick hitch can unlock. When the safe location is found, a light on the boom sensor flashes to let the operator know it is safe to release the hitch.
As the new bucket or attachment is connected the main pin locks in place even before the bucket link end of the hitch is located, ensuring the bucket can’t be dropped.
Hill Engineering has also been working on its quick hitches, the recently launched TEFRA Coupler being the result. The coupler, which fits excavators from 3-120tonnes, is said to eliminate one of the most dangerous aspects of handling attachments: the risk of attachments coming away completely.
Crusher bucket becoming popular
Buckets, breakers and rippers are not the only attachments in use in quarry and construction applications, particularly those that involved recycling of material. The crusher bucket is becoming an increasingly popular means of recycling construction and demolition waste, to provide reusable aggregate. Simex has launched the VSE 40, a screening bucket with a patented mechanism that allows the operator to change the size of the screened material from the cab at the touch of a button. The company claims that all similar products require 8-10 hours of work to change the setting. The VSE 40’s patented technology relies on two outer shafts that can be moved in and out to lessen or increase the distance from a central shaft. Simex has also been outlining a planned expansion into new strategic markets which includes teaming up with QBC Heavy Equipment Division (HED), Qatar’s leading distributor of construction machinery. “We represent world-renowned brands covering the whole spectrum of heavy equipment,” says Issa Kopty, general manager of QBC HED. “We were looking to complete our range of products and Simex fits our strategic needs perfectly, especially when it came to double-drum cutter heads.” Kopty also sees a demand for Simex crusher buckets in his market. “These are certainly a product that could sell well here. We are also looking at the trenchers, but often specifications call for wider trenching widths, so we are working with Simex to evaluate a specific product. “Qatar is undergoing enormous expansion and unlike other countries, infrastructure works are being planned for well into the future.”
Meanwhile, Allu has updated its offering, with the screener crusher D-series, which is divided into screening and crushing and fine screening applications. The company says that with its screening design wet materials can be screened down to a fine fragment size such as 15-25mm, with high productivity. Allu is also widening its product range to cover smaller base machines by introducing three fine screening bucket models for excavators under 12tonnes and for compact wheeled loaders with a maximum operating weight of 5tonnes. Allu can now cater for excavators between 4-45tonnes and for wheeled loaders between 2-30tonnes.
Simex crusher buckets could sell well in Qatar – Issa Kopty