Finning UK & Ireland is supporting the construction of the Norwich Bypass, one of the UK's largest road infrastructure projects
Finning UK & Ireland is supporting the construction of the Norwich Bypass, one of the UK’s largest road infrastructure projects, with a vast range of Cat machines and advanced Caterpillar Production Management (CPM).
Known as the Northern Distributor Road, the project in Eastern England is being managed by primary contractor Balfour Beatty, with P. Flannery Plant Hire chosen as the main earthworks contractor.
Flannery’s operations manager, Niall Hester, said: “We have worked with Balfour Beatty on numerous projects over the years, but the significance of the Norwich Bypass is the collaborative approach we have taken with sharing data and information.
“As part of the planning process, we worked alongside Finning to show the team at Balfour Beatty just how we can monitor performance on site. Through VisionLink, we’re able to provide data on payload, fuel burn and overall performance of each core machine on site.”
When Flannery was awarded the project, the company purchased a wide range of new Caterpillar machines through Finning, ranging from five to 50 tonne excavators and the latest ADT’s, including the Cat 730C Ejector Truck which is fitted with CPM.
The purchase of the ejector with CPM was firstly all about productivity and safety, as ejector trucks do not have to stop and lift the skip to tip material.
The Cat 730C ejector unit creates a safer working environment by displaying payload weight and status including external lights which automatically signal when target payload has been achieved.
The payload on the machine is shown on the in-cab monitor which enables operators to ensure the truck is not under or over loaded, which in turn optimises fuel burn per tonne on each cycle meaning the productivity of the machines are more efficient.
This information can be used by Balfour Beatty to provide the best possible carbon footprint on site as well as being able to see the impact of the fleet.
CPM tracks and measures data such as tonnes/load, tonnes/cycle, distance travelled/day, and how many litres of fuel a machine burns/hour, which gives the project a daily overview of progression.
No matter where the units are working on the new 20.1km dual carriageway, the data can be sent and received in real-time. For the team onsite this data is sent via VisionLink into the online portal, where management and the Balfour Beatty team can access it from any connected location.
By combining CPM with additional data relating to the health of machines through VisionLink, any potential issues with machines are more visible which results in a significant reduction in downtime.
For example, if an air filter was blocked, VisionLink would be notified meaning the team are able to get a Finning fitter straight on to site, saving time and preventing a greater issue.
Hester said: “From a performance perspective, we have also witnessed a dramatic increase in cycle times, not to mention the reduction in the use of more-expensive-to-run dozers.
“Each day we are learning more about the performance of equipment and this information is being shared with Balfour Beatty, so we can all see the benefits of technology driven project management.”