Mobile crushing and screening equipment manufacturer Keestrack will show an overview of its extensive product range at Con-Expo/Con-Agg 2026.
Keestrack, which has its US headquarters in Texas, will be at ConExpo (March 3-7, Las Vegas Convention Center) with its American, Canadian and Latin American dealers to showcase new products and solutions.
The completely newly-designed Keestrack R5e impactor is a full electric plug-in. It also has a plug-out connection to power additional equipment. The impactor used in aggregate production, recycling, quarrying and mining can be powered via mains connection, or via any gen set unit, in case there is no connection to the grid available.
Another e-driven machine in the Keestrack range is the H4e cone crusher. The H4e is designed to crush the toughest rock and ore, stone, gravel and aggregates.
The impressive H4e cone crusher with a proven cone of 10sT (9t) and a 3-deck after screen, with a total weight of 50sT (45t).
The cone alone, with proven technology, weighs 10sT (9t). The H4e including options like the 3-deck after screen of 12’x5’ (3.600mm x 1.500mm), weighs fully equipped 50sT (45t). The H4e also has an electric plug-in connection to run fully electric like all Keestrack e-driven units as well as a plug-out connection to connect to other e-driven equipment.
The H4e has its own on-board diesel /gen set to drive the equipment diesel/electric. The H4e cone has a feed size up to 7” (185mm), C.S.S. min.–max. ¾”-1½” (6mm – 38mm) depending on the crusher chamber configuration and a capacity up to 230 sT/h (208t/h) and is driven by a 251 kW e-motor.
Keestrack will also be exhibiting is long-established K6 scalper screen. The K6 was introduced to the market in 1996 and is still state of the art due to continuous R&D and a capacity up to 770 sT/h (600t/h). The long screen deck of 15’ x 6’ (4.500mm x 1.800mm), standard heavy duty plate apron feeder and hydraulic adjustable screen angle gives it an unrivalled performance at the lowest cost per produced ton. The numerous available options and screen decks make the K6 suitable for each screening application from scalping the biggest stones to fine-screening. Each Keestrack is designed to have good service access to minimize maintenance and repair times. The K6 has a hydraulic liftable screen box to have good access to the screen decks which makes it really easy to replace them.
The K6 is available in diesel/hydraulic, diesel/electric and in a ZERO version where there is no combustion engine onboard but only electric motors. The K6 at Conexpo is the standard load sensing diesel/hydraulic version which uses on average just above 3 gal/h.
Also being exhibited is Keestrack’s R3 impact crusher. The innovative technology, its safety features and the design of the R3 impact crusher has won several European design prices, one of them being the Red Dot award. The very compact and easy to transport impact crusher has a capacity up to 275 sT/h (250t/h). Equipped with vibrating feeder with a pre-screen of 4’x3’ (1.200mm x 920mm), an inlet opening of 30” x 38’’ (770mm x 960mm) (HxW) and a rotor diameter of 44” (1.100mm) and a rotor width of 3’ (920mm) and a 2-deck precession screen of 9’x4’ (3.100mm x 1.400mm), it weighs just 36sT (32t). The Keestrack is also available as diesel/electric drive with plug in functionality. At Conexpo the diesel/hydraulic version will be on display.
The Keestrack B7 heavy duty jaw crusher on show is especially designed for the toughest rock in quarrying and mining. The B7 jaw crusher has a vibrating feeder with 2-step grizzly of 7’3” x 3’7” (2.200mm x 1.080mm) (LxW) and a bottom deck in wire mesh of 4’9” x 2’10” (1.450mm x 870mm) (LxW) to optimize crushing results and to reduce wear.
The feed size of the material is up to 28” (700mm), the feed opening is 47”x 33” (1.200mm x 830mm) and the outlet adjustment C.S.S. is min.-max. 3” – 10” (75mm – 250mm). The jaw crusher is equipped with the patented N.S.S., non-stop system, which protects the crusher from uncrushable feed and resets the C.S.S. automatic during operations. The jaw crusher itself weighs 31 sT (28t), the easy to transport B7 jaw crusher weighs in total 77sT (70t).
Frederik Hoogendoorn, Keestrack VP sales & marketing, comments: “A focus on sustainability is at the core of our company as this is the origin of our business. Producing and recycling valuable raw materials is what mobile crushing and screening is all about, and our efforts are definitely having a positive impact on the ecological footprint.”
